Product Description
Company Info
Product Description
Conductors light emitting diode (LED) as the third generation of semiconductor lighting source. This product has many dreamlike merits:
(1) High light efficiency: Spectrum almost entirely focuses on visible light frequency; Its efficiency can reach 80-90%. But for the incandescent light, which its light efficiency is similar to LED light source; Its visible light efficiency is only 10-20%.
(2) High quality light: There is no ultraviolet ray and infrared ray in the spectrum, so there is not heat, no radiation, it belongs to the typical green lighting source.
(3) Low energy consumption: Monomer power is generally in 0.05-1w, it can be customized to meet the different needs through the cluster mode, it is rarely wasted. With it as the light source, its electric power consumption is only 1/8-10 that of ordinary incandescent lamp in the same brightness.
(4) Long service life: The standard lifespan of luminous flux attenuation to 70% is 100, 000 hours. A semiconductor lamp can be used normally for 50 years, even a person with longevity can only use two lamps at most in whole life.
(5) Reliable and durable: Without the easily damaged parts, such as: No tungsten filament, no glass-shells etc., abnormal rejection rate is very low, maintenance cost is extremely low.
(6) Flexible application: Small volume, flat packaging, easy to develop into the thin short products, and to be made into various forms (such as DOT, line, face) of specific application products.
(7) Security: Unit working voltage is approximately between 1.5-5v, working current is between 20-70mA
(8) Green and environmental protection: Waste can be recycled, no pollution, it contains mercury element unlike fluorescent light.
(9) Short response time: Applicable for frequent switching on/off and the high frequency operation.
(1) High light efficiency: Spectrum almost entirely focuses on visible light frequency; Its efficiency can reach 80-90%. But for the incandescent light, which its light efficiency is similar to LED light source; Its visible light efficiency is only 10-20%.
(2) High quality light: There is no ultraviolet ray and infrared ray in the spectrum, so there is not heat, no radiation, it belongs to the typical green lighting source.
(3) Low energy consumption: Monomer power is generally in 0.05-1w, it can be customized to meet the different needs through the cluster mode, it is rarely wasted. With it as the light source, its electric power consumption is only 1/8-10 that of ordinary incandescent lamp in the same brightness.
(4) Long service life: The standard lifespan of luminous flux attenuation to 70% is 100, 000 hours. A semiconductor lamp can be used normally for 50 years, even a person with longevity can only use two lamps at most in whole life.
(5) Reliable and durable: Without the easily damaged parts, such as: No tungsten filament, no glass-shells etc., abnormal rejection rate is very low, maintenance cost is extremely low.
(6) Flexible application: Small volume, flat packaging, easy to develop into the thin short products, and to be made into various forms (such as DOT, line, face) of specific application products.
(7) Security: Unit working voltage is approximately between 1.5-5v, working current is between 20-70mA
(8) Green and environmental protection: Waste can be recycled, no pollution, it contains mercury element unlike fluorescent light.
(9) Short response time: Applicable for frequent switching on/off and the high frequency operation.
Address:
1st Floor, Building 9, Yard No. 4, Anningzhuang Road, Xisanqi, Haidian District, Beijing, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting
Company Introduction:
Hengyuan Optical Valley Technology (Beijing) Co., Ltd with the headquarters in Germany is an OEM group and Engineering Technology service company, which specializes in producing all kinds of lights, Decorative lighting and accessories. The five production bases of the group in China set up in 2006 (Hongkong, Shenzhen, Jiangmen and Foshan ) and 2007 (Beijing), the business scope involves in design/research and development/production of moulds and products, including injection molding, spinning, pressing and extrusion (plastic extrusion, Aluminum extrusion), rolling, electronic assembly, the scientific research and manufacture of interior and exterior LED light source, and the production of solar photovoltaic power generation system, the production and manufacture of scenery complement solar energy and photo-electricity complement lighting.
The high power LED street light series (30w-200w), LED indoor lighting series (6w-20w), High power LED Tunnel light series (60w-120w), LED fluorescent lamp driving power and other powers such as Embedded light and spotlight developed by the company have passed the CE certification and Optical detection. The products have gained safety regulation certification from many countries, such as UL\VDE\CQC etc., which provides the confidence guarantee for the use of products. The independently developed light diffusion round-tube and heterotypic lamp shade have entirely solved the problems of LED glare and visible LED, after lighting the lamp, it can compare to the fluorescent tube. At present, the working solar LED street light, scenery complement LED street light and photoelectrical complementary LED street light have broken through the routine power supply mode, which don′t use power network to supply the electricity, they are real green environmental protection and clean energy.
The high power LED street light series (30w-200w), LED indoor lighting series (6w-20w), High power LED Tunnel light series (60w-120w), LED fluorescent lamp driving power and other powers such as Embedded light and spotlight developed by the company have passed the CE certification and Optical detection. The products have gained safety regulation certification from many countries, such as UL\VDE\CQC etc., which provides the confidence guarantee for the use of products. The independently developed light diffusion round-tube and heterotypic lamp shade have entirely solved the problems of LED glare and visible LED, after lighting the lamp, it can compare to the fluorescent tube. At present, the working solar LED street light, scenery complement LED street light and photoelectrical complementary LED street light have broken through the routine power supply mode, which don′t use power network to supply the electricity, they are real green environmental protection and clean energy.
